Contact Advantech Search Shopping list
  1.  
  2. 1-800-346-3119
  3. Login
Order By Part Number
Home Serial Serial to Fiber Optic Converters

Serial to Fiber Optic Converters

With a pair of these serial to fiber converters, any two pieces of asynchronous serial equipment can communicate at half or full duplex over two fibers at rates up to 460 kbps for RS-422/485 or 115.2 kbps for RS-232. Fiber lines are inherently resistant to EMI/RFI and transient surges, so they are ideal for data communications near heavy electrical equipment and other electrical or radio interference.
Results per page 2040 | Sort by Price Highest / Lowest / Latest
Page 1 of 1
FOSTCDR
Serial to Fiber Optic Converter - serial TB, multimode ST fiber
  1. Converts serial data signals to multi-mode fiber
  2. 2000V, 2-way isolation; EMI/RFI protection
  3. Data rate: up to 115.2 kbps
  4. Wide operating temperature: -40 to +80 °C
  5. DIN rail mount
  6. 10-30 VDC power source required (not included, sold separately)

$284.28

Compare More
FOSTCDR-INV
Serial to Fiber Optic Converter - serial TB, multimode ST, fiber light Off (idle)
  1. Converts serial data signals to multi-mode fiber
  2. Inverted fiber state – fiber Off in idle state
  3. 2000V, 2-way isolation; EMI/RFI protection
  4. Data rate: up to 115.2 kbps
  5. Wide operating temperature: -40 to +80 °C
  6. DIN rail mount
  7. 10-30 VDC power source required (not included, sold separately)

$284.28

Compare More
FOSTCDRI
3-way Industrial Isolated Serial to Fiber Converter - serial TB, multimode ST
  1. Converts serial data signals to multi-mode ST fiber optic
  2. 2000V 3-way optical isolation (input/output/power); EMI/RFI protection
  3. Data rate: up to 115.2 kbps
  4. Wide operating temperature: -40 to +80 °C
  5. DIN mount, IP20 plastic case
  6. 10–48 VDC power source required (not included, sold separately)
  7. UL Class 1 / Division 2

$307.97

Compare More
FOSTCDRI-INV
Industrial Isolated Serial to Fiber Converter - serial TB, multimode ST, fiber light Off (idle)
  1. Converts serial data signals to multi-mode ST fiber optic
  2. Inverted fiber state - fiber light OFF in idle state
  3. 2000V 3-way optical isolation (input/output/power); EMI/RFI protection
  4. Data rate: up to 115.2 kbps
  5. Wide operating temperature: -40 to +80 °C
  6. DIN mount, IP20 plastic case
  7. 10–48 VDC power source required (not included, sold separately)
  8. UL Class 1 / Division 2 rated

$307.97

Compare More
FOSTCDRI-PH-MC
Heavy Industrial Serial to Fiber Optic Converter - multi-mode SC
  1. Converts serial data signals to multi- or single-mode fiber
  2. 2kV, 3-way isolation (input, output, power circuits)
  3. Data rate: 9.6 to 115.2 kbps (bit-wise enable)
  4. -40 to +85°C wide operating temperature
  5. IP30 metal panel mount case (DIN rail adaptable)
  6. FCC, CE, IEC-61850-3, IEEE 1613, UL C1/D2
  7. 10-48 VDC power source required (not included, sold separately)
  8. Note: 2 units required to extend data via fiber optic connection (see datasheet)

$412.00

Compare More
FOSTCDRI-PH-MT
Heavy Industrial Serial to Fiber Optic Converter - multi-mode ST
  1. Converts serial data signals to multi- or single-mode fiber
  2. 2kV, 3-way isolation (input, output, power circuits)
  3. Data rate: 9.6 to 115.2 kbps (bit-wise enable)
  4. -40 to +85°C wide operating temperature
  5. IP30 metal panel mount case (DIN rail adaptable)
  6. FCC, CE, IEC-61850-3, IEEE 1613, UL C1/D2
  7. Note: 2 units required to extend data via fiber optic connection (see datasheet)
  8. 10-48 VDC power source required (not included, sold separately)

$412.00

Compare More
FOSTCDRI-PH-SC
Heavy Industrial Serial to Fiber Optic Converter - single-mode SC
  1. Converts serial data signals to multi- or single-mode fiber
  2. 2kV, 3-way isolation (input, output, power circuits)
  3. Data rate: 9.6 to 115.2 kbps (bit-wise enable)
  4. -40 to +85°C wide operating temperature
  5. IP30 metal panel mount case (DIN rail adaptable)
  6. FCC, CE, IEC-61850-3, IEEE 1613, UL C1/D2
  7. 10-48 VDC power source required (not included, sold separately)
  8. Note: 2 units required to extend data via fiber optic connection (see datasheet)

$520.15

Compare More
FOSTCDRI-SC
Serial to Fiber Optic Converter - single-mode SC
  1. Converts serial data signals to single-mode fiber optic
  2. 2000V 3-way optical isolation (two data ports, power circuit) and EMI/RFI protection
  3. Data rates up to 115.2 kbps
  4. Wide operating temperature: -40 to +80 °C
  5. IP30 plastic case, DIN mount
  6. UL 508 rated
  7. 10 – 48 VDC input power range
  8. Up to 15 km (9 mi) range
  9. Power supply not included, sold separately

$410.97

Compare More
FOSTCDRI-ST
Serial to Fiber Optic Converter - single-mode ST
  1. Converts serial data signals to single-mode fiber optic
  2. 2000V 3-way optical isolation (two data ports, power circuit) and EMI/RFI protection
  3. Data rates up to 115.2 kbps
  4. Wide operating temperature: -40 to +80 °C
  5. IP30 plastic case, DIN mount
  6. UL 508 rated
  7. 10 – 48 VDC input power range
  8. Up to 15 km (9 mi) range
  9. Power supply not included, sold separately

$410.97

Compare More
9PFLST
Serial to Fiber Optic Modem
  1. Fiber optic data transmission between two RS-232 devices
  2. EMI/RFI transient immunity to surges, spikes, ground loops
  3. Data rate:115.2 kbps; up to 4 km (2.5 mi) range
  4. Quick, inline installation
  5. Note: use in pairs; one at each end of fiber transmission line
  6. Port-powered, no external power required
  7. Optional external powering (power supply not included, sold separately)

$180.25

Compare More
FOSTC
Fiber Optic Modem - inline, DB25F serial, multimode ST fiber
  1. Extend serial signals up to 4 km (2.5 mi) over multi-mode fiber
  2. Point-to-point or multi-drop ring configuration
  3. Inherent EMI/RFI immunity/isolation from surges, spikes, ground loops
  4. Data rates: RS-232, up to 115.2 kbps; RS-422/485, 500 kbps
  5. Quick, inline installation
  6. External power source required (not included, sold separately)

$172.01

Compare More
ADAM-4541-BE
Multi-mode Fiber Optic to RS-232/422/485 Converter
  1. Easily mounted on a DIN-rail, panel or piggyback
  2. Transmission speeds of up to 115.2 kbps
  3. Optical fibers enable transmission of 2.5 km (measured with 62.5/125 mm)
  4. Half/Full-duplex, bidirectional transmission mode
  5. Avoids lightning strikes and EMI/RFI interference
  6. Prevents damage from electrostatic discharge
  7. Stable and error-free data transmission
  8. Automatic internal RS-485 bus supervision
  9. No external flow control signals required for RS-485
  10. Transient suppression and over-current protection on RS-422/485 data lines
  11. Reserved space for termination resistors
  12. LED for power and data flow indication
  13. Power requirement: +10 to + 30 VDC

$273.00

Compare More
ADAM-4542+-BE
Single-mode Fiber Optic to RS-232/422/485 Converter
  1. Easily mounted on a DIN-rail, panel or piggyback
  2. Transmission speeds of up to 115.2 kbps
  3. Half/Full-duplex, bidirectional transmission mode
  4. Avoids lightning strikes and EMI/RFI interference
  5. Prevents damage from electrostatic discharge
  6. Stable and error-free data transmission
  7. Automatic internal RS-485 bus supervision
  8. No external flow control signals required for RS-485
  9. Transient suppression and over-current protection on RS-422/485 data lines
  10. Reserved space for termination resistors
  11. LED for power and data flow indication
  12. Power requirement: +10 to + 30 VDC

$556.00

Compare More
Page 1 of 1
x
Office Locations

1-800-346-3119

Monday-Friday, 7am-5pm CST

Contact Advantech